• :  
BM ENG
  • Subscription
  • MS Catalogue
  • MS Pack
  • Purchase History
  • Cart
  • Hi
    !
    • My Profile
    • Portal
    • Log Out

Modal title

Widget settings form goes here

Search Malaysian Standard (MS)
 Advanced Search Search

METHODS OF TEST FOR PAINTS AND VARNISHES : PART E19 : DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:1998, MOD)
MS 133 : PART E19 : 2002
Status : Original
Format : PDF

This Malaysian Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.

It specifies a method for determining the film har ....Read more dness by pushing pencils of known hardness over the film. The test can be performed on a single coating of a paint, varnish or related product, or on the upper layer of a multi-coat system.

This rapid, inexpensive test has been found to be useful in comparing the pencil hardness of different coatings. It is more useful in providing relative ratings for a series of coated panels exhibiting significant differences in pencil hardness. The method is applicable only to smooth surfaces. Close

RM 15.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E8 : RESISTANCE TO IMPACT (PENDULUM TEST)
MS 133 : PART E8 : 2002
Status : Original
Format : PDF

This Malaysian Standard describes a procedure for determining the resistance of a singlecoat film or a multicoat system of paints, varnishes or related products to a single-blow impact
by a pend ....Read more ulum. Close

RM 15.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E15 : DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) (ISO 7784-2:1997, MOD)
MS 133 : PART E15 : 2002
Status : Original
Format : PDF

This part of Malaysian Standard is one of a series of standards dealing with the sampling and
testing of paints, varnishes and related products.
This Malaysian Standard specifies a method ....Read more for determining the resistance to abrasion of a
dried film of paint, varnish or related product, using abrasive rubber wheels and abrading by
making a rotary movement. Close

RM 30.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E14 : DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) (ISO 7784-1:1997, MOD)
MS 133 : PART E14 : 2002
Status : Original
Format : PDF

This part of Malaysian Standard is one of a series of standards dealing with the sampling and
testing of paints, varnishes and related products.
This Malaysian Standard specifies a method ....Read more for determining the resistance to abrasion of a
dried film of paint, varnish or related product, using abrasive paper attached to wheels and
abrading by making a rotary movement. Close

RM 15.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS AND VARNISHES : PART D5 : DETERMINATION OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20º, 60º AND 85º (FIRST REVISION)
MS 133 : PART D5 : 1997
Status : 1st Revision
Format : PDF

This Malaysian Standard is one of a series of standards dealing with the sampling and testing
of paints, varnishes and related products.
It specifies a test method for determining the spec ....Read more ular gloss of paint films using a
reflectometer geometry of 20°, 60° or 85° (Note I and Note 2). The method is not suitable for
the measurement of the gloss of metallic paints.
(a) The 60° geometry is applicable to all paint films, but for very high gloss and near-matt
films, 20° or 85° geometry may be more suitable.
(b) The 20° geometry, which uses a smaller receptor aperture, is intended to give
improved differentiation between high-gloss paint films (i.e. films with a 60° specular gloss
higher than about 70 units).
(c) The 85° geometry is intended to give improved differentiation between low-gloss paint
films (i.e. films with a 60° specular gloss lower than about 10 units).
NOTE 1. The same geometry should, of course, be retained for a series of measurements even if this means
disregarding the suggested limits.
NOTE 2. In some cases, the determination of specular gloss may not correspond to a visual assessment. Close

RM 30.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS AND VARNISHES PART C7 : DETERMINATION OF DRYING TIME USING BK DRYING RECORDER (SURFACE DRY, TOUCH DRY AND HARD DRY)
MS 133 : PART C7 : 1997
Status : Original
Format : PDF

1.1 This part of the Malaysian Standard specifies a method for determining the drying
time (surface dry, touch dry and hard dry) of paints and varnishes using BK drying recorder.
1.2 This ....Read more drying time recorder is designed for the provision of reliable data on the
transitional stages of drying or curing of paints and varnished coatings without the need to
monitor the process continuously. For conventional paint films these stages are described
consecutively as follows:
1.2.1 The surface dry stage;
1.2.2 The touch dry or tack free stage; and
1.2.3 The hard dry stage when the film is just robust enough to withstand the scoring of a
ball pointed needle. Reference should be made to MS 133: Part C3 which details method of
recording hard drying times Close

RM 15.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS : PART F9 : WASHABILITY
MS 133 : PART F9 : 1986
Status : Original
Format : PDF

This part describes a procedure for determining the washability of latex emulsion paints covered by MS 903
and MS 134

RM 15.00

Document will be sent via email



 Add To Cart
Paints and varnishes - Drying tests - Part C2: Surface-drying test using ballotini (Second revision) (ISO 9117-3:2010, IDT)
MS 133-C2:2012
Status : 2nd Revision
Format : PDF

This part of ISO 9117 specifies a test method for determining the surface-drying characteristics of a coating of
a paint or varnish which dries by the action of air or by chemical reaction of it ....Read more s components.
The method is not intended to apply to stoving products.
The method described may be carried out:
⎯ as a “go/no go” test, by determining the surface-drying state after a specified time, to assess compliance
with a particular requirement;
⎯ by determining the surface-drying state at suitable intervals until the surface-drying time is obtained. Close

RM 15.00

Document will be sent via email



 Add To Cart
METHODS OF TEST FOR PAINTS AND VARNISHES : PART E12 : INDENTATION TEST (SPHERICAL OR PYRAMIDAL) (ISO 6441 : 1984, MOD)
MS 133 : PART E12 : 2000
Status : Withdrawn
Format : PDF

This Malaysian Standard describes a test procedure for the conduct of an indentation test on a single or multi-coat system of paint, varnish or related product. The result is expressed as the depth of ....Read more indentation produced when an indentor of specified size and shape is applied to the coating under defined conditions.

The method is applicable if the indentation does not exceed approximately 10 % of the total coating thickness. Close

NOT FOR SALE

Please contact us if you are interested to purchase for reference.



METHODS OF TEST FOR PAINTS AND VARNISHES : PART E7 : RESISTANCE TO IMPACT (FALLING BALL TEST) (FIRST REVISION)
MS 133 : PART E7 : 2000
Status : 1st Revision
Format : PDF

This part describes a procedure for determining the resistance to impact of a singlecoat or a
multicoat system of paints, varnishes, or related products, using a free falling ball.
The met ....Read more hod is specifically intended to test products on substrates which are not significantly
distorted in the test. Close

RM 15.00

Document will be sent via email



 Add To Cart
  • ‹
  • 1
  • 2
  • ...
  • 550
  • 551
  • 552
  • 553
  • 554
  • 555
  • 556
  • ...
  • 580
  • 581
  • ›