MS Preview
MS IEC 60060-3:2008 (CONFIRMED:2015)
High-voltage test techniques - Part 3: definitions and requirements for on-site testing (IEC 60060-3:2006, IDT)
This Malaysian Standard is applicable to the following on-site test voltages and in service stresses, which are in relation to IEC 60060-1:
- direct voltage;
- alternating voltage;
- lightning impulse voltage of aperiodic or oscillating shape;
- switching impulse voltage of aperiodic or oscillating shape.
For special tests the following voltages are used:
- very low frequency voltage;
- damped alternating voltage.
1st Confirmation
• (none) / (none) / (none)
PDF
06/05/2019
41
NSC 05 - Generation, Transmission & Distribution of Energy
17.220.20 19.080
60.00