• :  
BM ENG
  • Subscription
  • MS Catalogue
  • MS Pack
  • Purchase History
  • Cart
  • Hi
    !
    • My Profile
    • Portal
    • Log Out

Modal title

Widget settings form goes here

Search Malaysian Standard (MS)
 Advanced Search Search

PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C (ISO 7091:2000, IDT)
MS ISO 7091:2006 (CONFIRMED:2011)
Status : Withdrawn
Format : PDF

This malaysian Standard specifies the characteristics of normal-series, prod uct-grade-C plain washers in the 100 HV hardness class and of nominal sizes ....Read more (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. 
Washers of hardness class 100 HV are sui table for
-hexagon bolts and screws of product grade C in pro perty classes up to and including 6.8;
-hexagon nuts of product grade C in property classes up to and including 6;
-case-hardened thread rolling screws.

If dimensions other than those listed in this International Standard are required, they should be selected from those given in ISO 887. When soft material pieces are clamped, or large clearance holes in th e workpiece are used, the user should check the technical suitability of this type of washer. Close

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000, IDT)
MS ISO 7090:2006 (CONFIRMED:2011)
Status : Withdrawn
Format : PDF

This malaysian Standard specifies the characteristics of normal-series, product-grade-A plain washer scham fered at the out side diameter, in the 200 HV ....Read more and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 5 mm to 64 mm inclusive. Close

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A (ISO 7089:2000, IDT)
MS ISO 7089:2006 (CONFIRMED:2011)
Status : Withdrawn
Format : PDF

This malaysian Standard specifies the characteristics of normal-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of n ....Read more ominal sizes (nominal thread diameters) rang ing from 1,6 mm to 64 mm inclusive. 
Washers of hardness class 200 HV are sui table for:
- hexagon bolts and screws of product grades A and B in property classes up to and including 8.8;
- hexagon nuts of product grades A and B in property classes up to an d including 8;
- hexagon bolts, screws and nuts of stainless steel of similar chemical composition;
- case-hardened thread rolling screws.

Washers of hardness class 300 HV are sui table for
- hexagon bolts and screws of product grades A and B in property classes up to and including 10.9;
- hexagon nuts of product grades A and B in property classes up to an d including 10.

If dimensions other than those listed in this malaysian Standard are required, they should be selected from those given in ISO 887.

When soft material pieces a Close

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



FISH-MEAL - VOCABULARY (ISO 7088:1981, IDT)
MS ISO 7088:2005
Status : Original
Format : PDF

This malaysian Standard defines terms relating to fish-meal.

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



Natural gas - Determination of hydrocarbons from butane (C4) to hexadecane (C16) - Gas chromatographic method
MS ISO 6975:1997 (CONFIRMED:2012)
Status : 1st Confirmation
Format : PDF

This malaysian Standard specifies a method of quantitative analysis of C4 to C16 hydrocarbons in natural gas. 
NOTES

1. c4 and c5 h ....Read more ydrocarbons are measured individually, and the higher hydrocarbons are grouped for each carbon number.

2. Complete analysis may be obtained by combining the results from this method with the unnormalized results from ISO 6974, which covers determination of helium, hydrogen, oxygen, nitrogen. carbon dioxide and hydrocarbons from C1 to C8.

3. If used in conjunction with ISO 6974, the results for C, to C8 are those obtained by means of the method described in ISO 6974; the results for C9 to C6 are those obtained by means of the method
described in this malaysian Standard. Close

RM 15.00

Document will be sent via email



 Add To Cart
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (First revision) (ISO 6974-6:2002, IDT)
MS ISO 6974-6:2004 (CONFIRMED:2012)
Status : 1st Confirmation
Format : PDF

This malaysian Standard describes a gas chromatographic method for the quantitative determination of the content of hydrogen, helium, oxygen, nitrogen, ....Read more carbon dioxide and C1 to C8 hydrocarbons in natural gas samples using three capillary columns. It is applicable to the analysis of gases containing constituents within the mole fraction ranges given in Table 1 and is commonly used for laboratory applications. These ranges do not represent the limits of detection, but the limits within which the stated precision of the method applies. Although one or more components in a sample may not be present at detectable levels, the method can still be applicable. 
This malaysian Standard is only applicable if used in conjunction with parts 1 and 2 of ISO 6974.

This method can also be applicable to the analysis of natural gas substitutes.

NOTE Additional information on the applicability of this method to the determination of natural gas substitutes is also given where relevant Close

RM 45.00

Document will be sent via email



 Add To Cart
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and online measuring system using two columns (First revision) (ISO 6974-4:2000, IDT)
MS ISO 6974-4:2003 (CONFIRMED:2012)
Status : 1st Confirmation
Format : PDF

This malaysian Standard describes a gas chromatographic method for the quantitative determination of natural gas constituents using a two-column system. ....Read more This method is applicable to determinations made in on-line processes or in the laboratory. It is applicable to the analysis of gases containing constituents within the mole fraction ranges. These ranges do not represent the limits of detection, but the limits within which the stated precision of the method applies. Although one or more components in a sample may not be detected present, the method can still be applicable. Close

RM 30.00

Document will be sent via email



 Add To Cart
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns (First revision) (ISO 6974-3:2000, IDT)
MS ISO 6974-3:2003 (CONFIRMED:2012)
Status : 1st Revision
Format : PDF

This malaysian Standard describes a gas chromatographic method for the quantitative determination of the content of helium, hydrogen, oxygen, nitrogen, ....Read more carbon dioxide and C1 to C8 hydrocarbons in natural gas samples using two packed columns. This method is applicable to determinations made in on-line processes or in the laboratory. It is applicable to the analysis of gases containing constituents within the mole fraction ranges given in Table 1 and which do not contain any hydrocarbon condensate. These ranges do not represent the limits of detection, but the limits within which the stated precision of the method applies. Although one or more components in a sample may not be detected present, the method can still be applicable. Close

RM 30.00

Document will be sent via email



 Add To Cart
NATURAL GAS - DETERMINATION OF COMPOSITION WITH DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 6: DETERMINATION OF HYDROGEN, HELIUM, OXYGEN, NITROGEN, CARBON DIOXIDE AND C1 TO C8 HYDROCARBONS USING THREE CAPILLARY COLUMNS (ISO 6974-6:2002, COR. 1:2003, IDT)
MS ISO 6974-6:2008
Status : Original
Format : PDF

This malaysian Standard describes a gas chromatographic method for the quantitative determination of the content of hydrogen, helium, oxygen, nitrogen, ....Read more carbon dioxide and C1 to C8 hydrocarbons in natural gas samples using three capillary columns. It is applicable to the analysis of gases containing constituents within the mole fraction ranges given in Table 1 and is commonly used for laboratory applications. These ranges do not represent the limits of detection, but the limits within which the stated precision of the method applies. Although one or more components in a sample may not be present at detectable levels, the method can still be applicable. Close

RM 45.00

Document will be sent via email



 Add To Cart
RUBBER, VULCANIZED - DETERMINATION OF TENSION FATIGUE (FIRST REVISION) (ISO 6943:2007, IDT)
MS ISO 6943:2010
Status : Withdrawn
Format : PDF

This malaysian Standard describes a method for the determination of resistance of vulcanized rubbers to fatigue under repeated tensile deformations, the ....Read more test piece size and frequency of cycling being such that there is little or no temperature rise. Under these conditions, failure results from the growth of a crack that ultimately severs the test piece. Close

NOT FOR SALE

Please contact us if you are interested to purchase for reference.



  • ‹
  • 1
  • 2
  • ...
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • ...
  • 523
  • 524
  • ›