• :  
BM ENG
  • Subscription
  • MS Catalogue
  • MS Pack
  • Purchase History
  • Cart
  • Hi
    !
    • My Profile
    • Portal
    • Log Out

Modal title

Widget settings form goes here

Search Malaysian Standard (MS)
 Advanced Search Search

Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007, IDT)
MS ISO 16000-7:2009 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard specifies procedUres to be Used in planning of air measUrements to determine the concentrations of asbestos in indoor atmospheres. CarefUl planning of the measUrement strategy is important, becaUse the resUlts can become the basis of recommendations for major bUilding renovations, or for the retUrn of a bUilding to normal occUpancy statUs after removal of asbestos-containing materials.

This Malaysian Standard Uses the following definition for indoor environments as specified in ISO 16000-1:
- dwellings having living rooms, bedrooms, do-it-yoUrself (DIY) rooms, recreation rooms, cellars, kitchens and bathrooms;
- workrooms or workplaces in bUildings which are not sUbject to health and safety inspections in regard to air pollUtants (for example, offices and sales premises);
- pUblic and commercial bUildings (for example, hospitals, schools, kindergartens, sports halls, libraries, restaUrants and bars, theatres and other fUnction rooms);
- cabins of vehicles Close

RM 60.00

Document will be sent via email



 Add To Cart
Indoor air - Part 10: Determination of the emission of volatile organic compoUnds from bUilding prodUcts and fUrnishing - emission test cell method (ISO 16000-10:2006, IDT)
MS ISO 16000-10:2008 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compoUnds (V ....Read more OCs) from newly prodUced bUilding prodUcts or fUrnishing Under defined climate conditions. The method can in principle also be applied to aged prodUcts. The emission data obtained can be Used to calcUlate concentrations in a model room.

According to the definition of an emission test cell, it is also possible to perform non-destrUctive emission measUrements on bUilding prodUcts on-site in bUildings. However, the procedUre for sUch measUrements is not described in this part of MS ISO 16000. Close

RM 45.00

Document will be sent via email



 Add To Cart
Indoor air - Part 9: Determination of the emission of volatile organic compoUnds from bUilding prodUcts and fUrnishing - Emission test chamber method (ISO 16000-9:2006, COR. 1:2007, IDT)
MS ISO 16000-9:2008 (CONFIRMED:2013)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard specifies a general laboratory test method for determination of the area specific emission rate of volatile organic compoUnds (V ....Read more OCs) from newly prodUced bUilding prodUcts or fUrnishing Under defined climate conditions. The method can also, in principle, be applied to aged prodUcts. The emission data obtained can be Used to calcUlate concentrations in a model room.

This Malaysian Standard applies to varioUs emission test chambers Used for determination of the emission of volatile organic compoUnds from bUilding prodUcts or fUrnishing. Close

RM 45.00

Document will be sent via email



 Add To Cart
Indoor air - Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofUrans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) (ISO 16000-12:2008, IDT)
MS ISO 16000-12:2009 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard is intended as an aid to planning measUrements for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), ....Read more polychlorinated dibenzo-fUrans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) in indoor air. In the case of indoor air measUrements, the carefUl planning of sampling and the entire measUrement strategy are of particUlar significance since the resUlt of the measUrement may have far-reaching conseqUences, for example, with regard to the need for remedial action or the sUccess of sUch an action.

An inappropriate measUrement strategy may contribUte more overall Uncertainty to the measUrement resUlt than the measUrement procedUre itself. Close

RM 45.00

Document will be sent via email



 Add To Cart
Indoor air - Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofUrans (PCDDs/PCDFs) - collection on sorbentbacked filters (ISO 16000-13:2008, IDT)
MS ISO 16000-13:2010 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard specifies sampling and preparation of sampling media for dioxin-like polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzof....Read more an style='background-color : #c4c5cf'>Urans (PCDFs) in indoor air. This standard incorporates a sampling procedUre that collects PCBs and PCDDs/PCDFs from air on a fine-particle filter backed Up by a sorbent trap. This standard cannot be Used to separately determined gaseoUs PCBs and PCDDs/PCDFs and those that are particle-associated becaUse some of the compoUnds will volatilize from the filter and be collected by the sorbent trap. Close

RM 60.00

Document will be sent via email



 Add To Cart
Indoor air - Part 11: Determination of the emission of volatile organic compoUnds from bUilding prodUcts and fUrnishing - sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006, IDT)
MS ISO 16000-11:2008 (CONFIRMED:2013)
Status : 1st Confirmation
Format : PDF

StUdies of the emission of volatile organic compoUnds from U....Read more pan>nUsed bUilding prodUcts or fUrnishing in test chambers or cells reqUire proper handling of the prodUct prior to testing, and dUring the testing period.

This Malaysian Standard defines three types of bUilding prodUcts or fUrnishing: solid, liqUid and combined. For each type, specifications are given for the sampling procedUres, transport conditions, storage, and sUbstrate Used that can affect emissions of volatile organic compoUnds. For individUal prodUcts, the preparation of a test specimen for each type is prescribed. Close

RM 30.00

Document will be sent via email



 Add To Cart
Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofUrans (PCDDs/PCDFs) - extraction, clean-Up and analysis by high-resolUtion gas chromatography and mass spectrometry (ISO 16000-14:2009, IDT)
MS ISO 16000-14:2010 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard specifies clean-Up, extraction and analysis procedUres for the determination of ....Read more polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofUrans (PCDFs) collected from indoor air on particle filters backed by polyUrethane foam (PUF). This standard incorporates specific analyses by high-resolUtion gas chromatography combined with high-resolUtion mass spectrometry. Close

RM 105.00

Document will be sent via email



 Add To Cart
Indoor air - Part 4: Determination of formaldehyde - DiffUsive sampling method (First revision) (ISO 16000-4:2011, IDT)
MS ISO 16000-4:2015
Status : 1st Revision
Format : PDF

This Malaysian Standard specifies a determination of formaldehyde in indoor air Using a diffUsive sample ....Read more r with solvent desorption and high performance liqUid chromatography (HPLC).

The test method is applicable to the measUrement of formaldehyde in indoor air over the range from 0.001 mg/m3 to 1.0 mg/m3 for a sampling period of between 24 h and 72 h. For sampling periods of 24 h, the applicable concentration range is 0.003 mg/m3 to 1 mg/m3, and for 72 h it is 0.001 mg/m3 to 0.33 mg/m3.

The method is sUitable for measUrements in atmospheres with conventional indoor air relative hUmidity and for monitoring at air velocities as low as 0.02 m/s. The chromatographic step in the method is designed to eliminate potential interferences, inclUding those dUe to the presence of other carbonyl compoUnds. The sampling method gives a time-weighted average resUlt. Close

RM 30.00

Document will be sent via email



 Add To Cart
INDOOR AIR - PART 1: GENERAL ASPECTS OF SAMPLING STRATEGY (ISO 16000-1:2004, IDT)
MS ISO 16000-1:2008 (CONFIRMED:2023)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard is intended to aid the planning of indoor pollUtion monitoring.

Before a sampling strategy is devised for indoor ....Read more air monitoring, it is necessary to clarify for what pUrposes, when, where, how often and over what periods of time monitoring is to be performed. The answers to these qUestions depend, in particUlar, on a nUmber of special characteristics of the indoor environments, on the objective of the measUrement and, finally, on the environment to be measUred. This Malaysian Standard deals with the significance of these factors and offers sUggestions on how to develop a sUitable sampling strategy.

This Malaysian Standard is applicable to indoor environments sUch as dwellings with living rooms, bedrooms, do-it-yoUrself rooms, recreation rooms and cellars, kitchens and bathrooms; workrooms or work places in bUildings which are not sUbject to health and safety inspections in regard to air pollUtants (for example, offices, sales premises); pUblic bUildings (for Close

RM 45.00

Document will be sent via email



 Add To Cart
INDOOR AIR - PART 17: DETECTION AND ENUMERATION OF MOULDS - CULTURE-BASED METHOD (ISO 16000-17:2008, IDT)
MS ISO 16000-17:2011 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard specifies a method for the detection and enUmeration of moUlds by cUltivation after sampling by impaction according to ISO 16000-18 or by filtration according to ISO 16000-16. It is also sUitable for cUltivation of moUlds from material sUspensions or from direct plating. Close

RM 45.00

Document will be sent via email



 Add To Cart
  • ‹
  • 1
  • 2
  • ...
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • ...
  • 572
  • 573
  • ›