• :  
BM ENG
  • Home
  • Service
  • International Standard
  • FAQ
  • Publish
  • signin
  •  Cart ()
Search Malaysian Standard (MS)
 Advanced Search Search




SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS : PART 2 : PARTICULAR REQUIREMENTS : SECTION 1 : ELECTRONIC SWITCHES (IEC 60669-2-1 : 1996 and its amendment 1 : 1997 and proposed amendment 2 : 1999 (CDV), MOD)
MS 616 : PART 2 : SECTION 1 : 2000
Status : Original
Format : PDF

This clause of part us replaced by the following:
This standard applies to electronic switches and to associated electronic extension units for
household and similar fixed electrical insta ....Read more llations either indoors or outdoors.
It applies to electronic switches for the operation of lamp circuits and the control of the
brightness of lamps (dimmers) as well as the control of the speed of motors (e. g. those used
in ventilating fans) and for other purposes (e.g. heating installations), with a working voltage
not exceeding 250 V a.c. and a rated current up to and including 16 A.
The operation and control as mentioned above are performed intentionally by a person via an
actuating member, a sensing surface or a sensing unit, by means of touch, proximity, turn,
optical, acoustic, thermal or any other influence.
NOTES.
1. This standard is not intended to cover devices falling within the scope of IEC 60730.
Examples of designs of electronic switches and functions are shown in Annex AA.
2. Electronic switches without a mechanical switch in the main circuit do not provide a “full of-state”.
Therefore, the circuit on the load side should be considered to be live. Close

RM 60.00

Document will be sent via email



 Add To Cart
Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and definitions (ISO 612-1978, IDT)
MS ISO 612:2005 (CONFIRMED:2023)
Status : 2nd Confirmation
Format : PDF

This Malaysian Standard was developed by the Working Group on Terms and Definitions for
Road Vehicles under the authority of the Road Vehicles Industry Standards Committee.
This standard ....Read more is identical with ISO 612-1978, Road vehicles - Dimensions of motor vehicles
and towed vehicles - Terms and definitions, published by the International Organization for
Standardization (ISO. However, for the purposes of this Malaysian Standard, the following
apply:
a) in the source text, "this International Standard" should read "this Malaysian Standard";
and
b) the comma which is used as a decimal sign (if any), to read as a point.
Compliance with a Malaysian Standard does not of itself confer immunity from legal
obligations.
NOTE. IDT on the front cover indicates an identical standard i.e. a standard where the technical content, structure,
wording and presentation of a Malaysian Standard is exactly the same as in an International Standard or is identical
in technical content and it may contain the minimal editorial changes specified in clause 4.2 of ISO/IEC Guide 21. Close

RM 45.00

Document will be sent via email



 Add To Cart
ROAD VEHICLES - BRAKING OF AUTOMOTIVE VEHICLES AND THEIR TRAILERS - VOCABULARY (ISO 611:2003, IDT)
MS ISO 611:2005 (CONFIRMED:2011)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard was developed by the Technical Committee on Braking System,
Suspension and Mechanical Support under the authority of the Road Vehicles Industry
Standards Committee. ....Read more
This Malaysian Standard is identical with ISO 611:2003, Road vehicles - Braking of
automotive vehicles and their trailers - Vocabulary, published by the International
Organization for Standardization (ISO). However, for the purposes of this Malaysian
Standard, the following apply:
a) the basis ISO 611 is printed in English and French languages. However, only the English
version is applied for this Malaysian Standard;
b) in the source text, "this International Standard" should read "this Malaysian Standard";
and
c) the comma which is used as a decimal sign, has been replaced with a point.
This Malaysian Standard cancels and replaces MS 1212:1991.
Compliance with a Malaysian Standard does not of itself confer immunity from legal
obligations.
NOTE. lDT on the front cover indicates an identical standard i.e. a standard where the technical content, structure,
wording and presentation of a Malaysian Standard is exactly the same as in an International Standard or is identical
in technical content and it may contain the minimal editorial changes specified in Clause 4.2 of ISO/IEC Guide 21. Close

RM 75.00

Document will be sent via email



 Add To Cart
PALM KERNEL MEAL AS ANIMAL FEEDING STUFFS - SPECIFICATION (SECOND REVISION)
MS 607:2007
Status : 2nd Revision
Format : PDF

This Malaysian Standard specifies the requirements and the methods of sampling and test for palm kernel meal (PKM) for use as animal feeding stuffs which can be produced mechanically
or through ....Read more solvent extraction process. Close

RM 15.00

Document will be sent via email



 Add To Cart
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002, IDT)
MS ISO 604:2003, (CONFIRMED:2011)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard was developed by the Technical Committee on General Methods of
Test for Plastics under the authority of the Plastics and Plastics Products Industry Standards
Commit ....Read more tee.
This Malaysian Standard is identical with ISO 604: 2002, ‘Plastics – Determination of
compressive properties’, published by the International Organization for Standardization
(ISO), which has the same title. The text of the International Standard is recommended for
publication as a Malaysian Standard without deviation. However, for the purpose of this
Malaysian Standard, the following apply:
a) in the source text, “this International Standard” should read “this Malaysian Standard”;
and
b) the comma which is used as a decimal sign (if any), to read as a full point. Close

RM 45.00

Document will be sent via email



 Add To Cart
SPECIFICATION FOR FLEXIBLE, UNSUPPORTED THICK PVC, SHEETING
MS 602:1979 (CONFIRMED:2011)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard specification specification prescribes the requirements and methods of test for flexible, unsupported thick PVC sheeting in the nominal thickness range of 0.25 mm to 1 mm inclu ....Read more sive.The material is not intended for electrical insulation purposes. Provision is made for six standard types as follows:

Type 101 - Low stiffness general purpose unprinted single or laminated thick PVC sheeting with plain or embossed surface. (see3.3)

Type 102 - PVC sheeting of type 101, printed;

Type 103 - Medium stiffness general purpose unprinted single or laminated thick PVC sheeting with plain or embossed surface.(see3.3);

Type 104 - PVC sheeting of type 103, printed;

Type 105 - High stiffness general purpose unprinted single or laminated thick PVC sheeting with plain or embossed surface.(see3.3);

Type 106 - PVC sheeting of type 105, printed. Close

RM 45.00

Document will be sent via email



 Add To Cart
SPECIFICATION FOR READY-TO-DRINK BEVERAGES (CARBONATED AND NON CARBONATED) (FIRST REVISION)
MS 601:1994
Status : 1st Revision
Format : PDF

1.1 This Malaysian Standard prescribes the specifications and methods of test for readyto-
drink beverages including fruit drinks and flavoured drinks, carbonated and noncarbonated.
1.2 Th ....Read more is standard excludes mineral water, soya bean milk and drinks, milk and milk shake,
vegetable juice, fruit juice, tea, coffee chicory, cocoa and their related products. Close

RM 60.00

Document will be sent via email



 Add To Cart
SPECIFICATION FOR CORDIALS, SQUASHES AND SYRUPS (FIRST REVISION)
MS 600:1998
Status : 1st Revision
Format : PDF

This Malaysian Standard prescribes the. specifications and method of tests for
cordials, squashes and syrups.

RM 60.00

Document will be sent via email



 Add To Cart
SPECIFICATION FOR FULL CREAM MILK POWDER (FIRST REVISION)
MS 599:1993
Status : 1st Revision
Format : PDF

This Malaysian Standard prescribes the requirements for full cream milk powder.

RM 30.00

Document will be sent via email



 Add To Cart
SPECIFICATION FOR ICE-CREAM (FIRST REVISION)
MS 598:1993
Status : 1st Revision
Format : PDF

This Malaysian Standard prescribes the requirements for ice cream.

RM 30.00

Document will be sent via email



 Add To Cart
  • ‹
  • 1
  • 2
  • ...
  • 497
  • 498
  • 499
  • 500
  • 501
  • 502
  • 503
  • ...
  • 580
  • 581
  • ›
©2020 All rights reserved
Department of Standards Malaysia (STANDARDS MALAYSIA). Best viewed on latest browser.