• :  
BM ENG
  • Home
  • Service
  • International Standard
  • FAQ
  • Publish
  • Sign In
  •  Cart ()
Search Malaysian Standard (MS)
 Advanced Search Search




PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2003, COR. 1:2005, MOD)
MS 2285-2:2010
Status : Withdrawn
Format : PDF

This Malaysian Standard gives requirements and recommendations for the selection and qualification of carbon and low alloy steels for service in equipment, used in oil and natural gas production and n ....Read more atural gas treatment plants in h2s-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials' requirements of the appropriate design codes, standards or regulations. This Malaysian Standard addresses the resistance of these steels to damage that may be caused by sulfide stress-cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking (SOHIC) and soft-zone cracking (SZC). This Malaysian Standard also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC). This Malaysian Standard Close

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



Domestic furniture - Beds and mattresses - Safety requirements and test methods
MS 2284:2010 (CONFIRMED:2015)
Status : 1st Confirmation
Format : PDF

This Malaysian Standards specifies mechanical safety requirements and testing for all types of fully erected domestic adult beds including all component elements such as bed frame, bed base, mattress ....Read more and mattress pads (when they form a unit with mattress). It does not apply to foldaway beds, bunk beds, children cots and adjustable beds for disable persons as well as water beds and air beds.Further tests may he applicable for test units that aremulti -purpose, e.g. convertible sofa beds and powerdriven systems.Assessment for ageing and degradation are not included. Close

RM 30.00

Document will be sent via email



 Add To Cart
METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD (ISO 1099:2006, MOD)
MS 2283:2009
Status : 1st Revision
Format : PDF

This Malaysian Standard specifies the condition for carrying out axial, constant-amplitude, force-controlled fatigue tests at ambient temperature on metallic specimens, without deliberately introduced ....Read more stress concentrations. The object of testing is to provide fatigue information, such as the relation between applied stress and number of cycles to failure for given materials at various stress ratios. Close

RM 45.00

Document will be sent via email



 Add To Cart
Masonry units - Specification - Part 2: Calcium silicate masonry units
MS 2282-2:2014
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations ....Read more and external chimney masonry. This standard is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units. It defines the performance related to e.g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate standard. This standard does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units. It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material. It does not cover storey height panels. It does not cover units intended for use as a damp proof course, nor units with an incorporated ther Close

RM 45.00

Document will be sent via email



 Add To Cart
Masonry units - Specification - Part 1: Fired clay masonry units (First revision)
MS 2282-1:2014
Status : 1st Revision
Format : PDF

This Malaysian Standard specifies the characteristics and performance requirements for masonry units manufactured from clay for use in masonry construction (e.g. facing and rendered masonry, load bear ....Read more ing or non-load bearing masonry structures, including internal linings and partitions, for building and civil engineering). This standard is intended to apply to two groups of fired-clay masonry units: a) LD units (see 3.4 and 5.2) comprising: i) clay masonry units with a gross dry density of less than or equal to 1 000 kg/m3 for use in protected masonry. b) HD units (see 3.5 and 5.3) comprising: i) all clay masonry units for use in unprotected masonry; ii) clay masonry units with a gross dry density of greater than 1 000 kg/m3 for use in protected masonry. Close

RM 75.00

Document will be sent via email



 Add To Cart
Masonry units - Specification - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) (Third revision)
MS 2282-3:2017
Status : 3rd Revision
Format : PDF

This Malaysian Standard specifies the characteristics and performance requirements of aggregate concrete masonry units made from dense and lightweight aggregates or a combination of both for which the ....Read more main intended uses are common, facing or exposed masonry in load bearing or non-load bearing building and civil engineering applications. The units are suitable for all forms of walling, including single leaf, external leaf to chimneys, cavity wall, partitions, retaining, and basement. They can provide fire protection, thermal insulation, sound insulation and sound absorption. This standard includes aggregate concrete masonry units of an overall non-rectangular parallelepiped shape, especially shaped and accessory units. It defines the performance related to e.g. strength, density, dimensional accuracy, and provides for the evaluation of conformity of the product to this standard. The marking requirements for products covered by this Malaysian Standard are also included. This standard doe Close

RM 75.00

Document will be sent via email



 Add To Cart
Masonry units - Specification - Part 6: Natural stone masonry units
MS 2282-6:2013
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the ....Read more main intended uses are common, facing or exposed masonry units in load bearing or non-load bearing building and civil engineering applications These units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption. This standard includes natural stone masonry units of an overall non-rectangular parallelipiped shape, specially shaped and accessory units for internal and external application.It defines the performance related to e.g. strength, petrographic description, density, porosity, dimensional accuracy, thermal conductivity, water absorption, and extreme whether and provides for the evaluation of conf Close

RM 30.00

Document will be sent via email



 Add To Cart
MASONRY UNITS - SPECIFICATION - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHT-WEIGHT AGGREGATES) (SECOND REVISION)
MS 2282-3:2010
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics and performance requirements of aggregate concrete masonry units made from dense and lightweight aggregates or a combination of both for which the ....Read more main intended uses are common, facing or exposed masonry in load bearing or non loadbearing building and civil engineering applications. The units are suitable for all forms of walling, including single leaf, external leaf to chimneys, cavity wall, partitions, retaining, and basement. They can provide fire protection, thermal insulation, sound insulation and sound absorption. This Malaysian Standard includes concrete masonry units of an overall non-rectangular parallelepiped shape, especially shaped and accessory units. It defines the performance related to e.g. strength, density, dimensional accuracy, and provides for the evaluation of conformity of the product to this Malaysian Standard. The marking requirements for products covered by this Malaysian Standard is also included. This Mala Close

RM 45.00

Document will be sent via email



 Add To Cart
Masonry units - Specification - Part 4: Autoclaved aerated concrete masonry units
MS 2282-4:2011
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics and performance requirements of autoclaved aerated concrete (AAC) masonry units for which the main intended uses are different types of load beari ....Read more ng and non-load bearing applications in all forms of walling including single leaf, cavity, partitions, retaining, basement and general use below ground level, including walling for fire protection, thermal insulation, sound insulation and the fabric of chimneys (excluding chimney flue units). It defines the performance related to e.g. strength, density, dimensional accuracy etc. and provides for the evaluation of conformity of the product to standard. The marking requirement for products covered by this standard is included.This standard does not cover the requirements for storey height panels, flue linings and masonry units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire. It does not specify standard sizes for autoclaved Close

RM 30.00

Document will be sent via email



 Add To Cart
CLAY AND CALCIUM SILICATE BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS
MS 2281:2010
Status : Original
Format : PDF

This Malaysian Standard gives guidelines for the dimensions of bricks, including those of special shape, made from clay and calcium silicate, traditionally used in the construction of brick masonry. R ....Read more equirements for bricks are covered by BS EN 771 Parts 1 and 2. NOTE. Derivation of dimensions of special shapes and typical examples of applications of special shapes are shown in Annex C (Figures C1 and C2 and Table C1). Annex D gives recommendations for how the principles of the test methods in the MS 1933 series of standards are to be applied to high density (HD) clay bricks conforming to BS EN 771-1:2003+A1:2005 with shapes as described in this standard. Close

RM 105.00

Document will be sent via email



 Add To Cart
  • ‹
  • 1
  • 2
  • ...
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • ...
  • 580
  • 581
  • ›
©2020 All rights reserved
Department of Standards Malaysia (STANDARDS MALAYSIA). Best viewed on latest browser.