• :  
BM ENG
  • Home
  • Service
  • International Standard
  • FAQ
  • Publish
  • Sign In
  •  Cart ()
Search Malaysian Standard (MS)
 Advanced Search Search




INTERFACE DEVICE FOR MALAYSIA MULTIPURPOSE SMART CARD - PART 1: PHYSICAL CHARACTERISTICS
MS 2287-1:2010
Status : Original
Format : PDF

This Malaysian Standard describes the physical characteristics of the interface device. It includes all items in MS ISO/IEC 7816 including further enhancement to cater for the GMPC usage. 

RM 15.00

Document will be sent via email



 Add To Cart
INTERFACE DEVICE FOR MALAYSIA MULTIPURPOSE SMART CARD - PART 3: COMMUNICATION PROTOCOL
MS 2287-3:2010
Status : Original
Format : PDF

This Malaysian Standard defined the communication protocol to enable the communication of the interface device (IFD) and the GMPC (MyKad) and other cards issued by Malaysian National Registration Depa ....Read more rtment such as MyKid, MyPR and MyKAS. Close

RM 15.00

Document will be sent via email



 Add To Cart
Plastics piping systems for hot and cold water installations - polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003, IDT)
MS 2286-5:2012
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics of the fitness for purpose of polypropylene (PP) piping systems, intended to be used for hot and cold water installations within buildings for the ....Read more conveyance of water,whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application. This Malaysian Standard covers a range of service conditions (classes of application) and design pressure classes. 
NOTE: It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with the other Parts of EN ISO 15874 (see Foreword) it is applicable to PP pipes, fittings, their joints and to joints with components of other plast Close

RM 30.00

Document will be sent via email



 Add To Cart
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity
MS 2286-7:2012
Status : Original
Format : PDF

This Malaysian Standard gives guidance for the assessment of conformity to be included in the manufacturer's quality plan as part of his quality system. This Malaysian Standard includes: a) requirem ....Read more ents for materials, components, joints and assemblies given in the applicable Part(s) of MS 2286; b) requirements for the manufacturer's quality system; NOTE. It is recommended that the quality system conforms to MS ISO 9001:2008. c) definitions and procedures to be applied if third party certification is involved. NOTE. If third party certification is involved, it is recommended that the certification body is accredited to EN 45011 or EN 45012, as applicable. In conjunction with the other parts of MS 2286 (see Foreword), this Malaysian Standard is applicable to polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under Close

RM 30.00

Document will be sent via email



 Add To Cart
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3 : Fittings (ISO 15874-3:2003, FDAM 1:2009, MOD)
MS 2286-3:2012
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics of fittings for polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of ....Read more water, whether or not intended for human consumption (domestic systems) and for heating systems under design pressures and temperatures according to the class of application. This Malaysian Standard covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in Table 1 of MS 2286-1 does not apply. 
NOTE. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It also specifies the parameters for the test methods referred to in this standard. in conjunction with the other parts of MS 2286 (see Foreword) it is applicable to fittings made Close

RM 30.00

Document will be sent via email



 Add To Cart
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003, AMD. 1:2007, MOD)
MS 2286-2:2012
Status : Original
Format : PDF

This Malaysian Standard specifies the characteristics of pipes made from polypropylene (PP) for piping systems intended to be used for hot and cold water installations within buildings for the conveya ....Read more nce of water whether or not intended for human consumption (domestic systems) and for heating systems under operating pressures and temperatures appropriate to the class of application. This Malaysian Standard covers a range of service conditions (application classes), design pressures and pipe dimension classes. For values of TD, Tmax and Tmal in excess of those in Table 1 of Part 1, this standard does not apply. 
NOTE 1. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with the other parts of MS 2286 (s Close

RM 45.00

Document will be sent via email



 Add To Cart
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATION - POLYPROPYLENE (PP) - PART 1 : GENERAL (ISO 15874-1:2003, AMD.1:2007, MOD)
MS 2286-1:2010
Status : Original
Format : PDF

This Malaysian Standard specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether ....Read more or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1). This Malaysian Standard covers a range of service conditions (classes of application), design pressures and pipe dimension classes.
NOTE. It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with the other parts of MS 2286 it is applicable to PP pipes, fittings, their joints and to joints with components of other plastics and non-plasti Close

RM 30.00

Document will be sent via email



 Add To Cart
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (First revision) (ISO 15156-1:2015, MOD)
MS 2285-1:2018
Status : 1st Revision
Format : PDF

This Malaysian Standard describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas p ....Read more roduction and in natural gas sweetening plants in H2S-containing environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. Close

RM 30.00

Document will be sent via email



 Add To Cart
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1: GENERAL PRINCIPLES FOR SELECTION OF CRACKING-RESISTANT MATERIALS (ISO 15156-1:2001, COR. 1:2005, MOD)
MS 2285-1:2010
Status : Withdrawn
Format : PDF

This Malaysian Standard describes general principles and gives requirements and recommendations for the selection and qualification of materials for service in equipment used in oil and gas production ....Read more and in natural gas sweetening plants in H2S-containing environments, where the failure of such equipment could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the material requirements given in the appropriate design codes, standards or regulations. This Malaysian Standard addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking and galvanically induced hydrogen stress cracking. Table1 provides a non-exhaustive list of equipment to which this Malaysian Close

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2003, COR. 1:2005, COR. 2:2005, MOD)
MS 2285-3:2010
Status : Withdrawn
Format : PDF

This Malaysian Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment, used in oil and natur ....Read more al gas production and natural gas treatment plants in h2s-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials' requirements of the appropriate design codes, standards or regulations. This Malaysian Standard addresses the resistance of these materials to damage that may be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically-induced hydrogen stress-cracking (GHSC). This Malaysian Standard is only concerned with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of Close

NOT FOR SALE

"Please contact us if you are interested to purchase for reference."



  • ‹
  • 1
  • 2
  • ...
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • ...
  • 580
  • 581
  • ›
©2020 All rights reserved
Department of Standards Malaysia (STANDARDS MALAYSIA). Best viewed on latest browser.