• :  
BM ENG
  • Home
  • Service
  • International Standard
  • FAQ
  • Publish
  • Sign In
  •  Cart ()
Search Malaysian Standard (MS)
 Advanced Search Search




ELECTRIC-FUSION-WELDED STEEL PIPES FOR HIGH-PRESSURE SERVICE AT MODERATE TEMPERATURES - SPECIFICATION
MS 2377:2011
Status : Original
Format : PDF

This Malaysian Standard covers steel pipe: electric-fusion-welded with filler metal added, fabricated from pressure vessel quality plate of several analysis and strength levels and suitable or high-pr ....Read more essure service at moderate temperatures. heat treatment may or may not be required to attain the desired properties or to comply with applicable code requirements. Supplementary requirements are provided for use when additional testing or examination is desired. 
The specification nominally covers pipe 16 in. (405 mm) in outside diameter or larger with wall thicknesses up to 3 in. (75 mm), inclusive. Pipe having other dimensions may be furnished provided it complies with all other requirements of this specification.

Several grades and classes of pipe are provided.

The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Close

RM 15.00

Document will be sent via email



 Add To Cart
ELECTRIC-RESISTANCE-WELDED STEEL PIPE - SPECIFICATION
MS 2376:2011
Status : Original
Format : PDF

This Malaysian Standard covers two grades of electric-resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 inch [12.70 mm], in ....Read more clusive, and in nominal sizes NPS 3/4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 inch [2.11 mm] to 0.134 inch [3.40 mm], depending on size. Pipe having other dimensions (Note 1) may be furnished provided such pipe complies with all other requirements of this specification. The pipe is intended for conveying gas, vapour, water or other liquid; only Grade A is adapted for flanging and bending (Note 2). The suitability of pipe for various purposes is somewhat dependent upon its dimensions, properties, and conditions of service, so that the purpose for which the pipe is intended should be stated in the order. The pipe may be furnished either non-expanded or cold expanded at the option of the manufacturer. When pipe is cold expanded, the amount of expansion Close

RM 30.00

Document will be sent via email



 Add To Cart
CARBON STEEL FORGINGS FOR PIPING APPLICATIONS - SPECIFICATION
MS 2375:2011
Status : Original
Format : PDF

This Malaysian Standard covers forged carbon steel piping components for ambient- and higher temperature service in pressure systems. included are flanges, fittings, valves, and similar parts ordered ....Read more either to dimensions specified by the purchaser or to dimensional standards such as the MSS, ASME, and API. Forgings made to this specification are limited to a maximum weight of 10 000 lb [4540 kg]. Tubesheets and hollow cylindrical forgings for pressure vessel shells are not included within the scope of this application. Although this specification covers some piping components machined from rolled bar and seamless tubular products, it does not cover raw material produced in these product forms. 
Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.

Specification A 266/A266M covers other steel forgings and Specifications A675/A675M and A696 cover other steel bar Close

RM 15.00

Document will be sent via email



 Add To Cart
Information technology - Procedure for registration of escape sequences and coded character sets (First revision) (ISO/IEC 2375:2003, IDT)
MS ISO/IEC 2375:2009 (CONFIRMED:2015)
Status : Original
Format : PDF

This Malaysian Standard specifies the procedure to be followed by a Registration Authority in preparing, maintaining and publishing a register of escape sequences and of the characters or character se ....Read more ts they identify. Close

RM 60.00

Document will be sent via email



 Add To Cart
PIPING FITTINGS OF WROUGHT CARBON STEEL AND ALLOY STEEL FOR MODERATE AND HIGH TEMPERATURE SERVICE - SPECIFICATION
MS 2374:2011
Status : Original
Format : PDF

This Malaysian Standard covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-95. These fitti ....Read more ngs are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Fittings differing from these ASME and MSS standards shall be furnished in accordance with Supplementary Requirement S58 of Specification A 960/A 960M. 
Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements may be specified in the order.

This Malaysian Standard does not cover cast welding fittings or fittings machined from castings. Cast steel welding fittings are governed by Specifications A 216/A 216M and A 217/A 217M.

This Malaysian Standard is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable Close

RM 30.00

Document will be sent via email



 Add To Cart
PIPING FITTINGS OF WROUGHT CARBON STEEL FOR LOW-TEMPERATURE SERVICE - SPECIFICATION
MS 2373:2011
Status : Original
Format : PDF

This Malaysian Standard covers wrought carbon steel and alloy steel fittings of seamless and welded construction, covered by the latest revision of ASME B16.9,ASME 16.11, MSS-SP-79, MSS-SP-83, and MSS ....Read more -SP-95. These fittings are for use in pressure piping and pressure vessel service at low temperature. 
Optional supplementary requirements are provided for fittings where a greater degree of examination is desired. When desired, one or more of these supplementary requirements shall be specified in the order.

This Malaysian Standard is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independentl Close

RM 15.00

Document will be sent via email



 Add To Cart
CARBON AND LOW-ALLOY STEEL FORGINGS, REQUIRING NOTCH TOUGHNESS TESTING FOR PIPING COMPONENTS - SPECIFICATION
MS 2372:2011
Status : Original
Format : PDF

This Malaysian Standard covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch ....Read more toughness testing. Although this specification covers some piping components machined from rolled bar and seamless tubular materials, it does not cover raw material produced in these product forms. 
No limitation on size is intended beyond the ability of the manufacturer to obtain the specified requirements.However, Class 3 of Grade LF787 is only available in the quenched-and precipitation heat treated condition.

Supplementary requirements are provided for use when additional testing or inspection is desired.These shall apply only when specified by the purchaser in the order.

This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable“M”specification designation (SI units),the material shall be furnished to inch-pound un Close

RM 30.00

Document will be sent via email



 Add To Cart
WOOD PRESERVATIVES, TREATED WOOD AND TREATED PLYWOOD - QUANTITATIVE ANALYSIS FOR BORON - PART 2: INDUCTIVE COUPLED PLASMA - ATOMIC EMMISSION SPECTROSCOPY (ICP-AES)
MS 2371-2:2010 (CONFIRMED:2020)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard details procedures for the determination of boron in wood preservatives, treating solutions, treated timber and treated plywood. 
This Malaysian Standard covers the ana ....Read more lytical methods of boron preservatives using inductive coupled plasma atomic emission spectroscopy method. Close

RM 15.00

Document will be sent via email



 Add To Cart
WOOD PRESERVATIVES, TREATED WOOD AND TREATED PLYWOOD - QUANTITATIVE ANALYSIS FOR BORON - PART 3: UV-VISIBLE SPECTROPHOTOMETER METHOD
MS 2371-3:2010 (CONFIRMED:2020)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard details procedures for the determination of boron in wood preservatives, treating solutions, treated timber and treated plywood. This Malaysian Standard covers the analytical ....Read more method of boron preservatives using spectrophotometer method. Close

RM 30.00

Document will be sent via email



 Add To Cart
WOOD PRESERVATIVES, TREATED WOOD AND TREATED PLYWOOD - QUANTITATIVE ANALYSIS FOR BORON - PART 1: TITRATION METHOD
MS 2371-1:2010 (CONFIRMED:2020)
Status : 1st Confirmation
Format : PDF

This Malaysian Standard details procedures for the determination of boron in wood preservatives and treating solutionsThis standard covers the analytical method of boron preservatives using titrimetri ....Read more c method..  Close

RM 15.00

Document will be sent via email



 Add To Cart
  • ‹
  • 1
  • 2
  • ...
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • ...
  • 580
  • 581
  • ›
©2020 All rights reserved
Department of Standards Malaysia (STANDARDS MALAYSIA). Best viewed on latest browser.