• :  
BM ENG
  • Home
  • Service
  • International Standard
  • FAQ
  • Publish
  • Sign In
  •  Cart ()
Search Malaysian Standard (MS)
 Advanced Search Search




Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 (IEC 60320-2-3:2005, IDT)
MS IEC 60320-2-3:2010 (CONFIRMED:2015)
Status : 1st Confirmation
Format : PDF

This Malaysia Standard applies to two-pole non-reversible appliance couplers for cold conditions for a.c. only, with a degree of protection against ingress of water higher than IPX0, with a rated volt ....Read more age not exceeding 250 V and rated current not exceeding 10 A for a 50 Hz or 60 Hz supply.

They are intended for the connection of the supply cord to portable electrical appliances of class II for household, commercial and light industrial use.

NOTE 1 This note of IEC 60320-1 applies.
NOTE 2 This note of IEC 60320-1 applies.
NOTE 3 This note of IEC 60320-1 applies.
NOTE 4 This note of IEC 60320-1 does not apply.
NOTE 5 This note of IEC 60320-1 applies.
Additional notes:
NOTE 6 IEC 60529 specifies the degree of protection against the ingress of water (IP code).
NOTE 7 IEC 60536 specifies the class of equipment. Close

RM 60.00

Document will be sent via email



 Add To Cart
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS (SECOND REVISION) (IEC 60320-1:2007, IDT)
MS IEC 60320-1:2010
Status : 2nd Revision
Format : PDF

This Malaysian Standard is applicable to two-pole appliance couplers for a.c. only, with or without
earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding ....Read more
16 A, for household and similar general purposes and intended for the connection of a supply
cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply.

NOTE 1 Appliance inlets integrated or incorporated in appliances or other equipment are within the scope of this standard. The dimensional and general requirements of this standard apply to such inlets, but certain tests may not be relevant.

NOTE 2 The requirements for connectors are based on the assumption that the temperature of the pins of the corresponding appliance inlets does not exceed
- 70 °C for connectors for cold conditions;
- 120 °C for connectors for hot conditions;
- 155 °C for connectors for very hot conditions.

NOTE 3 Appliance couplers complying with this standard are suitable for use at amb Close

RM 165.00

Document will be sent via email



 Add To Cart
Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment (First revision) (IEC 60320-2-2:1998, IDT)
MS IEC 60320-2-2:2003 (CONFIRMED:2015)
Status : 1st Revision
Format : PDF

This Malaysian Standard is applicable to two-pole interconnection couplers for a.c. only, with and without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding ....Read more 16 A, for household and similar appliances and equipment and intended for the interconnection of the electrical supply to electrical appliances or equipment for 50 Hz or 60 Hz supply.

Appliance outlets integrated in or incorporated in appliances or other equipment are within the scope of this standard. The dimensional and general requirements of this standard apply to such outlets, but certain tests may not be relevant.

The requirements for plug connectors are based on the assumption that the temperature of the socket contacts of the corresponding appliance outlets does not exceed 65 °C (cold conditions).

Interconnection couplers complying with this standard are suitable for use at ambient temperatures not normally exceeding 25 °C, but occasionally reaching 35 °C.

Interconnection c Close

RM 75.00

Document will be sent via email



 Add To Cart
Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance (First Revision) (IEC 60312-1:2010, IDT)
MS IEC 60312-1:2012
Status : 1st Revision
Format : PDF

This Malaysian Standard applicable for measurements of the performance of dry vacuum cleaners for household use in or under conditions similar to those in households.

RM 105.00

Document will be sent via email



 Add To Cart
Vacuum cleaners for household use - Part 2: Wet cleaning appliances - Methods of measuring the performance (First revision) (IEC 60312-2:2010, IDT)
MS IEC 60312-2:2012
Status : 1st Revision
Format : PDF

This Malaysian Standard applicable to wet cleaning appliances for household use in or under conditions similar to those in households.

The purpose of this standard is to specify essentia ....Read more l performance characteristics of wet cleaning appliances being of interest to the users and to describe methods for measuring these characteristics and is complementary to the methods for dry cleaning vacuum cleaner in IEC 60312-1. Close

RM 45.00

Document will be sent via email



 Add To Cart
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements (IEC 60309-1:2005, IDT)
MS IEC 60309-1:2013
Status : Original
Format : PDF

This Malaysian Standard applies to plugs and socket-outlets, cable couplers and appliance couplers, with a rated operating voltage not exceeding 690 V d.c. or a.c. and 500 Hz a.c., and a rated current ....Read more not exceeding 250 A, primarily intended for industrial use, either indoors or outdoors.

This standard applies to plugs and socket-outlets, cable couplers and appliance couplers, hereinafter referred to as accessories, for use when the ambient temperature is normally within the range of -25 °C to +40 °C. These accessories are intended to be connected to cables of copper or copper alloy only.

This standard applies to accessories with screwless type terminals or insulation piercing terminals, with a rated current up to and including 16 A for Series I and 20 A for Series II.

The use of these accessories on building sites and for agricultural, commercial and domestic applications is not precluded.

Socket-outlets or appliance inlets incorporated in or fixed to electrical equipment are w Close

RM 150.00

Document will be sent via email



 Add To Cart
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock (IEC 60309-4:2008, IDT)
MS IEC 60309-4:2013
Status : Original
Format : PDF

This Malaysian Standard applies to self-contained products that combine within a single enclosure, a socket-outlet or connector according to IEC 60309-1 or IEC 60309-2 and a switching device, with a r ....Read more ated operating voltage not exceeding 690 V d.c. or a.c. and 500 Hz, and a rated current not exceeding 250 A, primarily intended for industrial use, either indoors or outdoors.

These products may incorporate an interlock and/or protective devices. Close

RM 45.00

Document will be sent via email



 Add To Cart
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:2005, IDT)
MS IEC 60309-2:2013
Status : Original
Format : PDF

This Malaysian Standard applies to plugs and socket-outlets, cable couplers and appliance couplers with a rated operating voltage not exceeding 690 V, 500 Hz and a rated current not exceeding 125 A, p ....Read more rimarily intended for industrial use, either indoors or outdoors.

This standard applies to plugs and socket-outlets, cable couplers and appliance couplers with pins and contact tubes of standardized configurations.

This standard applies to plugs and socket-outlets, cable couplers and appliance couplers, hereinafter referred to as accessories, for use when the ambient temperature is normally within the range -25 °C to 40 °C.

The use of these accessories on building sites and for agricultural, commercial and domestic applications is not precluded.

This standard applies to accessories with screwless type terminals or insulation piercing terminals, with a rated current up to and including 16 A for Series I and 20 A for Series II.

Socket-outlets or appliance inlets incorporated in or Close

RM 120.00

Document will be sent via email



 Add To Cart
DEPENDABILITY MANAGEMENT - PART 3-3: APPLICATION GUIDE - LIFE CYCLE COSTING (IEC 60300-3-3:2004, IDT)
MS IEC 60300-3-3:2011
Status : Original
Format : PDF

This Malaysian Standard provides a general introduction to the concept of life cycle costing and covers all applications. Although the life cycle costs consist of many contributing elements, this stan ....Read more dard particularly highlights the costs associated with dependability of the product.

This Malaysian Standard is intended for general application by both customers (users) and suppliers of products. It explains the purpose and value of life cycle costing and outlines the general approaches involved. It also identifies typical life cycle cost elements to facilitate project and
programme planning.

General guidance is provided for conducting a life cycle cost analysis, including life cycle cost model development. Illustrative examples are provided to explain the concepts. Close

RM 90.00

Document will be sent via email



 Add To Cart
DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD (IEC 60300-3-2:2004, IDT)
MS IEC 60300-3-2:2010
Status : Original
Format : PDF

This Malaysian Standard provides guidelines for the collection of data relating to reliability, maintainability, availability and maintenance support performance of items operating in the field. It de ....Read more als in general terms with the practical aspects of data collection and presentation and briefly explores the related topics of data analysis and presentation of results. Emphasis is made on the need to incorporate the return of experience from the field in the dependability process as a main activity. Close

RM 60.00

Document will be sent via email



 Add To Cart
  • ‹
  • 1
  • 2
  • ...
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • ...
  • 580
  • 581
  • ›
©2020 All rights reserved
Department of Standards Malaysia (STANDARDS MALAYSIA). Best viewed on latest browser.