PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2005, IDT)
The adoption of the ISO standard as a Malaysian Standard was recommended by the
Technical Committee on Pulp, Paper and Board under the authority of the Chemical and Materials Industry Standards Committee.
This Malaysian Standard is identical with ISO 534:2005, Paper and board – Determination of thickness, density and specific volume, published by the International Organization for Standardization (ISO). However, for the purposes of this Malaysian Standard, the following apply:
a) in the source text, “this International Standard” should read “this Malaysian Standard”;
b) the comma which is used as a decimal sign (if any), to read as a point; and
c) reference to International Standard should be replaced by equivalent Malaysian
Standards as follows:
Referenced International Standard
ISO 186, Paper and board – Sampling to
determine average quality
ISO 187, Paper, board and pulps – Standard
atmosphere for conditioning and testing and
procedure for monitoring the atmosphere and
conditioning of samples
ISO 536, Paper and board – Determination of
grammage
Corresponding Malaysian Standard
MS ISO 186, Paper and board – Sampling
to determine average quality
MS ISO 187, Paper, board and pulps –
Standard atmosphere for conditioning and
testing and procedure for monitoring the
atmosphere and conditioning of samples
MS ISO 536, Paper and board –
Determination of grammage
Compliance with a Malaysian Standard does not of itself confer immunity from legal
obligations.
NOTE. IDT on the front cover indicates an identical standard i.e. a standard where the technical content, structure, and wording (or is an identical translation) of a Malaysian Standard is exactly the same as in an International Standard or is identical in technical content and structure although it may contain the minimal editorial changes specified in clause 4.2 of ISO/IEC Guide 21-1
Withdraw
MS ISO 534:2007 has been replaced by MS ISO 534:2018 Paper and board – Determination of thickness, density and specific volume (ISO 534:2011, IDT) (First revision)
