PAINTS AND VARNISHES - COATING POWDERS - PART J11: INCLINED-PLANE FLOW TEST(ISO 8130-11:1997 (2007), IDT)
This Part of ISO 8130 is one of a series of standards dealing with the sampling and testing
of paints, varnishes and related products.
It specifies a method for determining the flow characteristics of a fused thermosetting coating
powder down a plane inclined at a set angle to the horizontal.
The result of the test described in this Part of ISO 8130 gives an indication of the degree of
melt flow that may occur during the curing of the coating powder. This characteristic
contributes to the coherence of the coating, to its surface appearance and to the degree of
coverage over sharp edges.
The test acts as a useful method for checking for batch to batch variation in the behaviour of
a given coating powder. Correlation between the results from coating powders of differing
composition is not to be expected.
This method is unlikely to yield meaningful results with coating powders which have gel
times of less than one minute at the test temperature when characterised according to
ISO 8130: Part 6.
